General Description
Outfitted using the zero leak bidirectional checking sole-noid valves, this energy unit is made for the operation of two independent circuits. Which are respectively for that most important and subordinate platforms from the double scissors lift. Two cut-off valves are made use of for decreasing the machine manually in case of energy reduction. If more independent circuits are expected for the application please contact us for availability.
Remark: one. Please seek advice from our sales engineer to the different pump displacement, motor electrical power or tank capability.
2. CSA 
or UL licensed motors are available on request.
Unique Notes
1. The AC motor is of S3 duty cycle, which might only work intermittently and repeatedly, i.e., 1minute on and 9 minutes off.
two. Clean all of the hydraulic components concerned just before set up of the power unit.
three. Viscosity from the oil shoud be 15~46 cst,along with the oil should really be clean and no cost of impurities,N46 hydraulic oil is advised.
4. The power unit must be mounted vertically.
five. Check the oil degree while in the tank after the preliminary running from the energy unit.
six. Oil transforming is required immediately after the original a hundred operation hours,afterwards as soon as each 3000 hours.