Basic Description
This electrical power unit functions a everlasting magnet motor which has a electrical power up gravity down circuit. Activate the start solenoid to start the motor to lift the machine. The lowing movement is activated through the solenoid valve together with the lowering speed controlled through the pressure compensated flow management valve. Products of this series can be broadly used in the sector of logistic units this kind of as fork lift, mini lift table, and so forth.
Particular Notes
1. This energy unit is of S3 duty cycle, i.e.,non-continuous operation, thirty seconds on and 270 seconds off.
2. Clean all of the hydraulic elements concerned ahead of set up of the energy unit.
three. Viscosity from the hydraulic oil shoud be 15~46 cst, which should also be clean and absolutely free of impurities. N46 hydraulic oil is advised.
four. This electrical power unit is created to be mounted vertically.
five. Check the oil degree in the tank right after the primary star in the power unit.
six. Oil changing is required soon after the preliminary one hundred operation hours,afterwards when just about every 3000 hours.
seven. More pump sizes and tank sizes are avaiable on request.