Downsizing Your Process with Larger Energy Chains
HK style roller chains conform to H style of ANSI, and their thickness of inner and outer hyperlink plates are equal to people of your following greater size chain. Therefore, HK form roller chains are higher in tensile strength by about 20%and in highest allowable load by about 15% than these of common roller chains. Since the excess weight of your chains is additionally greater, HK variety roller chains are ideal for that application of heavy duty at lower speed.
Suggested uses
?Optimal for areas the place higher strength is required but massive and heavier chains can not be used.
Choice of chains
Pick a proper HK sort roller chain according to “Low-speed selection”
For the highest allowable load, see the next table of dimensions.
HK style roller chains can be found as much as triplex.
Sprockets
Use typical sprockets to get a simplex HK roller chain Because the transverse pitches are bigger than individuals of common chains from the situation of duplex or triplex, conventional sprockets are not able to be utilized. Refer for the sprocket tooth profiles for HK
Connecting hyperlink and offset link
The tensile power of connecting back links and offset links are listed to the left, however the maximum allowable load is reduce than that with the base chain. Please talk to us really should you’ve got any issues. It really is advised to implement the connecting hyperlink of interference-fitted (FJ, HJ)
Hardly ever make the holes on the connecting plate 
greater and by no means make the pins thinner to facilitate the get the job done for fitting the pins to the connecting plate, due to the fact otherwise the fatigue strength will be lowered.
Collection of chains
Decide on a appropriate HK kind roller chain according to “Low-speed selection”
For your greatest allowable load, see the following table of dimensions.
HK sort roller chains are available up to triplex.
Sprockets
Use conventional sprockets for any simplex HK roller chain Since the transverse pitches are bigger than people of normal chains inside the situation of duplex or triplex, normal sprockets cannot be utilized. Refer towards the sprocket tooth profiles for HK
Connecting link and offset link
The tensile power of connecting back links and offset links are listed about the left, however the greatest allowable load is lower than that from the base chain. Please seek the advice of us should you might have any issues. It can be advised to use the connecting link of interference-fitted (FJ, HJ)
Never ever make the holes of the connecting plate larger and in no way make the pins thinner to facilitate the perform for fitting the pins into the connecting plate, because otherwise the fatigue power might be lowered.