DK Detachable Teeth Sprockets

Any harm on the teeth surfaces of a sprocket diminishes the existence of the conveyor chain.
With conventional sprockets, significantly worn sprocket teeth had been repaired by teeth padding or the whole sprocket was replaced. In both situation, restore was pricey and with teeth padding, accuracy was impaired. We designed new sprockets with detachable teeth for independent replacement. This sprocket is extremely rated by our clients to the dramatic savings in expense and time.
The teeth may be replaced by two techniques: person tooth replacement or sectional teeth substitute.
The bolts and nuts employed for mounting the teeth on for the sprocket are spot-welded to stop loosening.
The respective structures are illustrated about the suitable.
The above photo along with the prime suitable illustration show a sprocket for individual tooth substitute. Because the joint face among the replaced teeth as well as sprocket is formed in a exceptional arc, the bonding accuracy is higher and also the sprocket strength is enhanced. Moreover, since the load acting on the mounting bolts is decreased, there’s much less likelihood of loosening. This sprocket construction is patented.
You will find two sorts of hubs: cast steel and welded sheet steel hubs. Cast steel hubs are utilized for huge sprockets receiving hefty loads and welded sheet steel hubs for other applications.